Base Model with Easy to operate controler.

With built in internal rotary speed control switch.

See video for controler operation.

Specifically designed for those converting/upgrading their old time lathes and drill press's to modern design servo motors.

Thick Aluminum Face mount allows for easy adaption to fit many old fashioned lathes and drill press's

Note: Custom bolt hole patterns are possible.

Sold with a custom built matching control unit.

Speed is programmable for any range between 300 to 3,000 RPM

See images for measurements.

Note: the maximum distance between control unit and motor is 28 inches.

Runs on typical 110 to 120 volt AC household power supply's

Includes:

A complete servo motor as seen in images.
A stand alone and programmable custom built servo motor driver with overload protection and internal variable speed control.

Motor programming + spindle speeds and Reverse:

The motor speed can be programmed to operate in any range chosen by the user.
Between 300 and 3,000 RPM's.
The full range of speed (RPM's) can also be controlled with just the speed control knob.
Speed control programming only requires a few easy steps.
Reverse is simple, just hold the yellow button for a few seconds.
Programming includes the ability to set bottom and top RPM range separately. In other words you can program the system to
run the spindle at any speed or range of speeds you choose (see below).
Slowest speed achievable: Motor 200 RPM. (Below 300 is not recommended).
Highest speed: 3,000 RPM. Setting above 3,000 RPM also voids warranty.
Soft start is programmable and will be set as soft as possible when you receive this motor. This program is very effective in reducing drive belt wear etc.
Braking strength is also programmable and will be set as low as possible.
Self diagnostics with fault code chart.
Safe turn on system where the speed control knob must be in the full counter clockwise (stop) position when turned on. When turned on the self diagnostic system checks for faults and will not allow the motor to turn on until the speed control knob is turned all the way to stop first.
Control unit has the ability to stop the motor or what ever it is turning in 2 different locations with external hall effect sensors not included.
Cannot be programmed to communicate with any CNC controller at this time.
Use at your own risk. Our liability is limited to the purchase price of this item.

Recent feedback:

Fantastic setup! Have this on my lathe with 5c head stock and wow!! Thank u!

Can't find this anywhere else. Stupid powerful torque. Great communications. Buy it.

Its running great on my 1942/52 first generation ShopSmith.

Base Model 1500 2 HP 16NM Torque 300~3,500 RPM

$300.00

Excluding Sales Tax

Quantity

Motor Specifications:

Watt: 1500 (2 HP)

Voltage: 110V

HZ: 60

Torque: 16 N.M.

RPM: 100 to 3,000 RPM in 100 RPM increments.
Note: Manufacturer recommended 500 to 3,000 RPMs
My personal testing results: This motor runs best between 300 and 3,100 RPMs.
A complete servo motor as seen in images.

A programmable custom built stand alone servo motor driver with internal speed control and overload protection.

Comes fully programed with interactive on-line programing instructions
Limited 180 day parts warranty. Labor is buyers responsibility:
See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty starts on the day our records show the system as paid and not the date the item is actually received.

Servo Motor. - I will exchange a defective servo motor for up to 180 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts.

Computer control unit. - I will exchange a defective control unit PCB for up to 180 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts.

Improper instalation or abusive operation is not warrenty.
Certain items are not returnable (See listings). Items costing less than $15 each are not returnable.

No reason is required.

Buyer pays return shipping.

Buyer provides tracking number that shows the item is in possession of the return shipping company before the 30 day time period runs out.

30 day time period starts when tracking shows original order as in possession of USPS.

Buyer to provide tracking # and shipping company name to be e mailed to servomotorkit@gmail.com within 36 hours of when issued.

Return must be shipped through USPS, UPS or FedEx.

Defective products are always returnable or refundable but will require documentation. See warranty time limits as they are directly related to if a product qualify's as defective. Shipping is always refunded on defective products. You are required to provide proper documentation of said defect.

Shipping is not refundable simply because you changed your mind or the product does not fit. It is your responsibility to look up and or measure to insure proper fit and suitability for your intended use. If you are not sure, ask us. If we say it fits in an e-mail or text message and it does not; than we pay the shipping instead of you.

All items returned must be in like new and unused condition:
This includes original packaging.

Missing packaging will result in a restocking charge of up to 10%

Installed items will not be refunded or charged up to 50% to restore and resell as a refurbished unit.

Swapping out parts will result in no refunds, all warranty's voided and no new orders accepted.
Try honesty instead, we will be happy to assist and find a solution that keeps both of us happy.
All after the sale customer support is done by text to the number included in the box and not through eBay.

All Warenty and returns are done in house. Use the text number provided in the box to request assistance.

Ask questions before ordering.

2024 Tethered Control
Shown here running our toothed
pulley belt drive mini mill upgrade.
there are 4 versions of our mini
mill mill kits. I will update the website
to show them as soon as I can

Turn sound on by clicking the note
in the lower right corner
Pause the Video by clicking center
screen

Base Model 1500 2 HP 16NM Torque 300~3,500 RPM

Motor Specifications:

Includes:

Shipping:

180 Day Warranty:

Basic 30 Day Return Policy:

Customer support:

How can we help?