top of page

3/4 HP 550 Watt Computer Controlled Servo Motor.
With internal speed control switch. 

This Face Mount Version comes with M8 X 1.25 button head mounting screws as seen in image 1.

New in box with 2024 basic 3 switch control unit.

Speed is programmable for any range between 200 to 4,500 RPM
Note: Settings are limited to 10 RPM intervals.

See images for measurements.
Note: the maximum distance between control unit and motor is 28 inches.

Runs on typical 110 to 120 volt AC household power supply's


Motor programming + spindle speeds and Reverse:
  • The motor speed can be programmed to operate in any range chosen by the user.
    Between 200 and 4,500 RPM's.
    Note: Settings are limited to 10 RPM intervals.
  • The full range of speed (RPM's) can also be controlled with just the external speed control switch.
  • Speed control programming only requires a few easy steps.
  • Reverse is simple, just hold the yellow button for a few seconds.
  • Programming includes the ability to set bottom and top RPM range separately. In other words you can program
    the system to run the spindle at any speed or range of speeds you choose (see below).
  • Slowest motor speed achievable:
    200 RPM.
  • Higest motor speed achievable:
    4500 RPM.
  • Soft start is programmable and likely set as soft as possible when you receive the motor. This program is very effective in reducing drive belt wear etc.
  • Braking strength is also programmable and likely set as low as possible.
  • Self diagnostics with fault code chart and programming instructions are found on line.
  • Safe turn on system:
    If the power goes out, You will have to press the start button when the power comes back on
  • Use at your own risk. Our liability is limited to the purchase price of this item.

Basic 550 Watt servo motor internal 3/4 HP 4 NM torque

Excluding Sales Tax
  • Motor Specifications:
    • Watt:           550  (3/4 HP)
    • Voltage:      110 ~ 130 Volts AC single phase
    • HZ:             60
    • Torque:      4 N.M.
    • RPM:         100 to 4,500 RPM in 10 RPM increments.
bottom of page