LMS High Torque Mini Mill Upgrade to 900 Watt, 1.2 HP and a whopping 11 NM Torque .
Thats double the torque maybe tripple what the OEM 500W motor produces.
Add to your your mini mill reverse on the fly for power thread cutting.
Currently some parts are still hand made:Lead Time can be up to 5 days.
- Motor is our high performance 900W 1.2 HP and in stock.
- Motor controller is our custom made 2024 design with reverse on the fly.
- Motor drive pulley is now manufactured for us.
- Motor mounting plate is in stock.
- Belt to fit our 900 Watt motor to your LMS high torque is included.
About the system:
- Control unit is placed above and and clear of the metal filings.
- Runs extremely smooth and quiet.
- Adds the reverse on the fly feature.
- Adds the E-Stop feature.
- Includes the power went out safty feature. This is a must for automated systems.
- Lowest achievable spindle speed: 150 RPM
- Highest spendle speed is 2,460 RPM +/- 50 RPM
- Increases hp from (factory claims 1/3 to 0.66 hp depending on model) to 1.2 HP and 11 NM meter torque.
All milling machines are dangerous, increasing the horsepower increases this danger.
It is your responsibility to insure fit and proper application. We make no guarantee of safety, application or that this product is suitable for your intended use.
Our liability is limited to the purchase price of this item.
California Prop 65:
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
AVERTISSEMENT:
Cancer et Troubles de l’appareil reproducteur
www.P65Warnings.ca.gov
900W High Torque LMS Mini Milling Machine Servo motor Upgrade Kit
Fits:
- LMS High Torque model 3900.
- LMS High Torque model 3960.
- LMS High Torque model 6450.
- LMS High Torque model 4190:
See the last 3 images. These show how a
customer fit this kit to their mill. They also
redesigned it so that the spindle lock
engaged safety shut down was function-able.
That by the way takes some skill as it is not
included in the kit. - LMS early version High Torque 3990.
We had a customer use this kit on his. He
states he had to use the original motor
plate as a spacer in addition to our motor
plate.
Consider this, the pulley we use is hard to get.
Sometimes it is a longer version. This allows it
to fit the machines we have not tested without
belt alignment.
More often we us the shorter version and adjust
alignment on our demo machine. So if you are
installing on a 3990 you may need to check
alignment by measuring with a caliper type depth gauge.
Our demo has holes so we can see it running.
